Taranis X9D 3S Battery Hatch +10mm

This is a "reworked" version of the battery cover.

Unfortunately, the original design could not accommodate the 3s battery, so I had to start from scratch in Fusion 360 and slightly enlarge the original design.

Thanks to this, I could convert the old Taranis charging port into a 12V+ output for FPV Goggles or the PINECIL portable soldering iron.

Thanks to this, I always have a 12V+ power source at hand :)

Battery used:

Gens Ace Soaring 2700mAh 11.1V 30C 3S1P Lipo battery - XT60 plug

Capacity: 2700 mAh

Balance plug: XH

Continuous current 30C

Dimensions 103x33.5x25mm

Maximum charging speed 3C

Plug: XT-60 plug (change to XT-30)

Voltage: 11 ,1V (3-cell)

Weight 190 grams

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Yes

Supports:

Resolution:

0.12

Infill:

Filament: 123-3d PLA Gray

Category: R/C Vehicles