Drybox Roll Holder

These are holders to be installed in/through the walls of a drybox. They are designed to use the cardboard roll from the core of wrapping paper, cut down to box size.

The ‘outer’ holder is meant to have the tube deposited in it from above, where the holder is larger than the tube diameter. The ‘inner’ holder fits inside the tube, and has a bit of flex. I installed one of each in a box to hold it tight, but still allow it to be removed. 

Each holder requires a ‘backing’ piece to pinch the box, and is held in place by up to 4 x M3 screws and hexagonal washer, but only really require two screws to be stable.

Printed in transparent Prusament PETG with no supports and 15% support cubic infill, and printed perfectly.