July 17, 2021
Description
Multiple other designers have tried these but I really wanted to make some that are tested and have pictures. I tried some on thingiverse but those were too tight so I just took caliper measurements and designed these directly off of the SPAMF parts. I used some M3 screws from the spare parts bag fromm the Prusa MMU. M3 by 10 screws are too long to use two of them for the short ones so I used a short screw with it. these hold the blaster together very solidly. I used PLA and printed them without a brim. If your printer isn't tuned you may need some sandpaper :)
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
11
T-MAN
