IKEA Lack Enclosure for 500x500x4mm Windows (removable)

• The feet raise the table up for a flush fit
• Latches for closing the windows 
• Hygrometer holder for information inside the chamber

You can remove every window anytime for ventilated printing or leave the top of the windows open with a slight angle. 

Ø x L: 3 x 16 mm woodscrews for the feet and the hygrometer holder

Ø x L: 3 x 25 mm woodscrews for the latch

Printed in PETG, no supports needed

I also used prints from other users for the Filament holder or the Sheet holder.