Circuit Playground NeoPixel Yoyo

In this project, we'll show you how to 3D Print a Yoyo and light it up with NeoPixel LEDs using Adafruit Circuit Playground! This project is a derivative of Morgan Stewart's Circuit Playground Yoyo (Watch her demo it on Adafruit's Show & Tell). In this remix, we'll encase a single Circuit Playground board and a lipo battery in 3D printed parts to make a yoyo. The NeoPixel LEDs can shine through the cover, making cool glowy effects. Most of the yoyo parts are 3D printed, and no hardware (machine screws, hex nuts, etc) are required. They feature threads that allow the pieces to be twisted together.

Check out the full tutorial:
https://learn.adafruit.com/circuit-playground-yoyo/overview

Download Fusion 360 Source:
http://a360.co/2ctqUyH

Get Circuit Playground:
https://adafruit.com/products/3000

Morgan Stewart's Circuit Playground Yoyo:
http://www.thingiverse.com/thing:1695697

Demo on Adafruit Show & Tell:

Print instructions

Licence: Creative Commons - Attribution Category: Electronics