Magic Wand Effects with Circuit Playground

Add motion triggered sound and light effects to any prop with Circuit Playground. This magic wand was designed specially to use the Circuit Playground as its centerpiece effect.
https://www.youtube.com/watch?v=hqGEoQycUnM
https://learn.adafruit.com/sword-and-wand-prop-effects-with-circuit-playground/magic-wand

It is 3D printed with a mix of translucent and opaque materials, has a mounting plate onto which you can secure the Circuit Playground, as well as an integrated LiPoly battery and on/off switch.

In addition to the Circuit Playground, LiPoly battery, and switch, you'll also need four M3 x 6mm screws and nuts, two M3 x 16mm screws and nuts, and four M2 x 6mm screws and nuts.

Print instructions

Licence: Creative Commons - Attribution Category: 3D Printing Print Settings

Printer Brand: Ultimaker

Printer: Ultimaker 2

Rafts: Yes

Supports: Yes

Resolution: 0.1mm

Infill: 20

Notes:

Print the star parts in translucent PLA, the rest can be any color you like. You'll need to print ten copies of the trim piece.