Whiteboard Holder / Bracket / Wallmount - "Magnetoplan"

A nice wallmount holder designed for the “Magnetoplan Design Whiteboard CC” whiteboards. 

Printer Brand:

Prusa

Printer: 

I3 MK3S+

Rafts:

No

Supports: 

Yes

Resolution:

0.4 Nozzle

Infill: 

25%

Layer height: 

0,20 mm

Used Filament:

PET-G Black

Model scale:

1:1

________________________________________________________________________________________________________________

To achieve optimal results I recommend to set your printer to 7x7 mesh bed leveling.

Supports are required and already included in the GCode-File. You can use M4x45 screws to mount the brackets on the wall. There is an easy acces for the screwdriver.

It is of significant importance to print the holders in the side position so that the force transmission in the pulling direction takes place along the grain direction.

No liability is accepted for incorrect assembly and improper use. Use at your own risk! But it works fine when you do it right. 

 <3 thx
Serg.G