Outer Wilds Relic Lantern with Flame

Disclaimer: I started this project a long time ago and learned a lot about modelling in the meantime. This means that the model isnt as well done as other newer ones, but i still wanted to publish it, in case someone else would like to fine tune things.

The result of that is that some parts are a bit tricky to print or fit together and need a bit more additional work. In my case i used some spare filament and a soldering iron to fill some gaps of the front part and secure the handle to allow it to work as such. 

Another result is that the gcode files are 0,6mm nozzle diameter, since i got the Prusa XL upgrade after printing it.

Hey there,

i adjusted the existing model from coboba and cut it into different pieces while also adding ways to insert a light. Ive gotten just a small light from amazon but ive left a version of the main body with no hole, so you can pretty much choose any light and just add the hole yourself to make it work.

The light im using has a diameter of 9cm and a height of 3,5cm for reference

This should also make it easier in case you want to print it less big. I could imagine a smaller version with space for a LED tealight might look very nice as well!

I used white PLA for everything except the flame. For the flame i used uncolored PLA. 

Picture included to clarify what “Flaps” and “Thingies” are (just in case of confusion).

Gcode for Prusa XL is included as well. Depending on other printers you might need to change the scale or add additional cuts.