clips for pencils and markers

Interlocking clips pencils and markers (copic classic, ciao, faber castell, uni paint, posca large and slim). In sets of 1, 2 and 4 so you can mix and match them to fit in tins, draws or wherever you want to put them. I would a a bit of glue to keep them in place and on the joint becuse they do flex and some can pop apart mostly the few smaller ones. 

They do fit others like sharpie fine liners, sharpie markers, artline fine liners and others. 

STL files are sets of each type just download and remove any you don't want use the.

I've printed mine with the default PLA .20mm layer height setting with a brim as the small one tend to move around. 

measurements of each clip

copic classic 15.5mm

copic ciao 12.6mm

faber castell 8.4mm

uni paint 11.2mm

posca large 13.4mm

posca slim 10.3mm

derwent 11.6

micron/copic multiliner 9.65

copic multiliner SP 10.6

sharpie 11.6

ill also add more 

If you have something of slimier size it will fit you can also scale any of them aside from the classic copic.

if any knows a better way to connect the pieces or wants more sizes let me know by leaving a commit ill update them.