Adjustable MagSafe Monitor Holder

This is a three-part MagSafe mount for any display that is up to 22mm thick. You can either use the rear camera (for example as Continuity Camera) or flip the holder over and use the front camera the additional screen.

Materials

• 1 M3*40 screw
• 1 M3 nut
• 1 MagSafe ring/ charger (I used these: https://a.co/d/hxEXm14 ; https://www.apple.com/shop/product/MHXH3AM/A/magsafe-charger?)

If you want to use your own ring or charger you can modify the customizable holders that are also uploaded for example in Prusa Slicer. Just subtract a cylinder. (If the model is centered: Y: center-13,5mm) https://help.prusa3d.com/article/negative-volume_238503
Please consider uploading a remix if you did.

Assembly 

Put the three parts together. insert the nut at the side and add screw the screw in from the other side.
Depending on how you put in the top part with the magnets, your camera will either be facing forwards or backwards.