How to use the jig:
- 1) set the slider to the desired thickness
- 2) set it slightly before the blade
- 3) move the parallel guide until the wood touches the bearing, then fix it in position
- 4) perform the cut
- 5) repeat step 3) and 4)
Necessary parts:
- 1-3x 608 ball bearings (I used 2)
- 1x Countersunk M8 bolt
- 1x M8 nut
- 3x M4 nut
- 3x M4 bolts
Assembly:
→ assembly instructions (link)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Woodenti
