January 14, 2024
Description
This is my first object I ever made. I made this because I was tired of my wheels on my tool cart dragging/binding when running over something small (ie ziptie, rock, air hose). Seems to work very well with my Harbor Freight tool cart. To get to the correct caster wheel size, one would need to adjust the width and height of the piece.
(ADD 55.08mm TO LENGTH / ADD 28mm TO WIDTH) + Caster wheel size for total size.
Not sure if that makes sense, if you have any questions feel free to reach out.
*The size that is uploaded worked well for a 127mm x 50.8mm swivel with wheel lock
**This will always be a work in progress, but I have printed it and used it. It works well, the only thing I have issues with is if there is something protruding from the ground that doesn't move.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Infill:
20%
Filament:
Overture PETGBlack
Notes:
(ADD 55.08mm TO LENGTH / ADD 28mm TO WIDTH) + Caster wheel size for total size.
*The size that is uploaded worked well for a 127mm x 50.8mm swivel with wheel lockLicense:
Creative Commons — Attribution
9
Viet D
