Towel hook for bathroom radiator

I made this to put two towels on the long side of the radiator as I do not want to cover it completely.

The side column of the radiotor is 30.5mm thick and 40.5mm wide.

I printed the final version with PP as PLA started bending under the weight of the towel when the raditor got hot. PP has now worked a whole German winter without problems.

Print Settings

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Notes:

Do not print with PLA. If raditor gets hot the hook becomes soft and bents under the weight of the towel.

I used PP. It stands more heat and is more elastic.

And of course print it "upside down", so the top side and the tip of the hook shall be on the plate.

Category: Bathroom