PHILIPS Sonicare - toothbrush case

PHILIPS Sonicare - toothbrush case

Due to the mechanical resistance during travel, the box is designed for PETG printing. To reduce stringing, I recommend lowering the printing temperature to 220°C or 215°C. Other settings normal, 2 outer perimeters, fill approx. 15%. Bottom parts print bottom down, top parts print top down.

I recommend adding magnets 6mm x 2mm diameter to the boxes. For better connection especially when travelling. Magnets are not necessary for bathroom use only. 4 magnets per box are required. Magnets to be stuck with glue. 

In the slicer, the box can be completed with a label with the owner's name or a description of the brushes. 
It is also advisable to add roughening at the grip points when opening.