January 15, 2024
Description
In your slicer you will need to add custom G-code to pause the print, or in Orca/Bambu you can select to add a pause once you slice the image and use the layer preview slider and insert pauses at the layers listed below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA - Black Transmission Distance: 0.3
PLA - Red Transmission Distance: 1
PLA - Orange Transmission Distance: 7.5
PLA - White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Lava Red
At layer #8 (0.72mm) swap to Orange
At layer #15 (1.28mm) swap to White for the rest.
License:
Creative Commons — Attribution
Chad Stokes
