iPhone 6S Plus Mount for Original Prusa Enclosure

Mounts an iPhone 6S Plus as a webcam on the Prusa Enclosure. I find it helpful to mount the camera outside the enclosure, and this angle plays nicely with the LED add-in, since it's aligned with the light. Because of this, glare from the panel isn't an issue. 

It screws on from the inside with 2x M3 hex nuts and 2x M3x8 screws. Use the “screw pulling” technique to get the nuts in. The lower left nut is a pain unless you use a relatively long screw (I used M3x30) as a tool to hand-pull the nut into its slot. All of the hardware was spare from my enclosure and MK4 kits.

There's a slot in the bottom for a charger, and the CAD can be easily edited to fit other phone sizes. My phone has a glass screen protector, so this may even be slightly loose without one of those.