Ubiquity Unifi 48V PoE Injector Wall Mount

I needed to mount my Unifi 48V PoE injector to the wall, but didn't have the stock one that comes with it. Checked online and could only find wall mounts for the 24V PoE injector, so I modeled this one. I modeled it to encase the PoE injector because I was afraid of how strong the thin clips would be that the stock mount uses since there wouldn't be much material there. 

There are 2 versions, one with the PoE/LAN ports facing upwards, and one facing down in case you need either orientation, both use 7mm countersunk screws to mount to the wall.

Print Info:

Printed on: Prusa MK4

Supports: No

Material: PETG