Handle 96mm

The pitch is 96mm as that were the holes on my drawers. If you need different size, you can use the f3d and step file or you can send me a message and I'll reupload with different dimensions.

The orientation of nut hole is ideal for printing on the side without supports. I printed my handles in 0.25mm resolution and additional material added by PrusaSlicer around diagonal edges was enough so I didn't have to change infill.

I used M3x20 screw with spacer from inside the cabinet and nut placed inside the handle. It was enough for the 16mm desk I have, but you can easily use longer screws as they will be hidden in the handle.

The model was inspired by handles by Boogie https://www.prusaprinters.org/prints/10946-handle-120mm-nut-version