SWX1 Artillery Sidewinder CraneCam Mount for JoyAccess Camera

This is a camera mount for the JoyAccess camera (or similar) on a SWX1 Artillery Sidewinder printer. It gives the camera a low vantage point towards the nozzle and travels on the Z axis so it rises with the print's progression. It also has an integrated USB cable channel. It's pretty stiff in order to handle higher speeds and accelerations than OEM. The part is held in place with four M5 bolts on the end of the X axis beam. It can be printed on 300mm bed diagonally. No supports needed.

 It was inspired in part by https://www.printables.com/model/382708-c270-mount-artillery-sidewinder.

BOM:
2x M5 x 8mm (top)
2x M5 x 12mm (bottom)
1x M3 x 5mm (camera)
4x 3030 T nuts

Camera: http://www.joyaccess.cn/product/detail/184.html

If you prefer a top-down view:
https://www.printables.com/model/726555-swx1-artillery-sidewinder-top-down-joyaccess-or-si