ClipOn Handle for SL1/S Speed Platform

Other versions:

• 27.03.2022: ClipOn Handle for SL1/S Speed Platform V3
• 22.10.2021: ClipOn Handle for SL1/S Speed Platform V2

Working with resin printing on the Prusa SL1/SL1S can be messy and unsafe if the build platform is dropped when handling. The platform is heavy and has very little resin free area to grip after a print - this makes handling difficult and avoiding resin dripping everywhere… if unlucky it is dropped into the vat…

Benefits of my handle design:

• Has a firm grip on the build platform.
• No sharp corners or edges.
• Easy to to use - no extra mechanical parts.
• Fits inside when the lid is closed (DO NOT print with the handle on).
• Can of cause be used together with Prusa SL1/S Speed Platform Drip Adapter.
• Prints without support and can be used right away.
• Can be used both on Prusa SL1 and SL1S Speed.

See photos for usage.

The handle is designed to be printed in PETG as it takes advantage of PETG springiness and higher temperature resistance. Other materials may work, but has not been tested - let me know if you have success with PLA, ABS etc…

>> If you like my design, please leave a like, a rating or a make… ;-) Thank You!