Framework Expansion Card Box

The Framework laptop comes with Expansion Cards. You'll probably find you need to carry some with you. I designed this box to carry four of them.

The box holds them with a clip inside the USB hole.
The features print-in-place lids kept shut with a 5mm magnet.

Prints fine from PLA or PETG at 0.15 or 0.20mm using a 0.4 nozzle. 
If you can't make the print-in-place clearances, the lids can be snapped on later.
 

Only requires two 5mm magnets (max 15mm long)

Note:

• Be cautious of stringing inside the Type-C hole, you don't what that inside the plugs.

ps. If someone knows of a method to replace the maget for a comfortable printed snap-close mechanism, I would like to know.