HP 27es vesa adapter 75x75

Since the HP 27es doesn't have a vesa mount I made this adapter for it. It's compatible with 75x75 mounts with M4x12 screws (because they came with the arm I bought), if you need different screw holes let me know.

Print Settings

• Material: PETG or some other durable material
• Layer height: 0.2mm (higher should be fine (not tested) the important thing is good layer adhesion)
• Perimeters: 3 (it should be fine with 2 (not tested) but I really didn't want this thing to break)
• Infill: 20% adaptic cubic or 15% gyroid
• Supports: the bridging on the lower hole should be just fine but if you want to be extra sure and avoid sagging add some sopports there (the gcode I provided already has them)

If you find this model useful please like it :)