Phone stand with Ikea Nordmärke wireless charger

A phone stand (horizontal) for Ikea Nordmärke wireless charger.

Assembly

There are 4 indents for anti-slip feet with a diameter of 8mm. Feel free to glue your preferred ones or use the model as is.

Print settings

• PLA or other rigid filament
• 0.4mm nozzle (0.6mm may work too)
• 0.2mm layer height recommended
• print in default orientation or flip the model on its side (with a cable hole facing the build plate)
• add a brim if you are printing the model on its side (10mm+)
• snug supports are preferred, organic may work as well
• optional - block supports for feet indents