January 19, 2024
Description
Fan Mount for Turbo Fan on BiQu H2 V2 is the 20mm stl, and the H2 500c is the 18mm stl. It attaches the fan to top two holes instead of to the fan where Biqu has a model for but doesn't work anyway.
You need three 3 mm screws, two 6 mm and one 25 mm long. The model pushes the fan away slightly making sure it's tight so it positions correctly.
Prints without support in around 20 minutes on an Ender 3.
The mount is for the turbo fan with duct sold by BiQu and is only the top screw hole mount.
License:
Creative Commons — Public Domain
7
What2Print
