Bird house roof tiles

I made the print in separate parts because:

• this print is too big to fit on the build plate
• it allows you to customize how long you want the sides to be

A regular sized bird house does not need the extensions. My bird house has a big camera on the side and for that I need the extra extension on one side. I added models for with and without extensions to make it more modular and hopefully more useful for the community. The left and right sides are different, because I mirrored them. Hm maybe I should rotate them in a future v2 model, because then the left and right side can use the same parts ;-).

I printed them with standing up on the build plate. I added a 15mm brim with 120% brim flow and only support touching the build plate. If you rotate the model correctly, you should only have support on the connector part and a little bit under the first tile row.

Printing times in hours at default speed (if I remember correctly):

• roof top: 4 
• top sides: 16
• extension: 22

Click and glue the parts together and make a bird happy.