Sovol SV05 Print Surface Guide

This is a simple guide for aligning the magnetic print surface to the bed.  I decided I only required a corner for alignment.  The guide uses the three existing holes in the bed, but I used longer M4 screws.

November 15, 2024:
I rarely use the entire print bed on the SV05 because I have a larger SV01.  However, I discovered this guide interferes with the hotend if the print fills the maximum area.  I reduced the height of the guide and now it clears the hotend (Print Surface Guide V2).

0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01