January 27, 2024
Description
This is a model of the back section of the Bonesborough Market from The Owl House. It is the conuinuation of the Middle Section and Front Section. The later pictures show all three sections together.
This model consists of 10 stalls, 1 building, and the surrounding wall.
Printed at 0.15mm layer height. Some parts require supports.
| Part | Supports |
|---|---|
| toh market-knife sharpener | yes |
| toh market-fish desk | no |
| toh market-stall long white | yes |
| toh market-stall cone | no |
| toh market-stall pots | yes |
| toh market-stall left end | no |
| toh market-stall berries | yes |
| toh market-stall white | no |
| toh market-stall wood | yes |
| toh market-stall blue corner | yes |
| toh market-tall house | no |
| toh market-wall back | no |
The archive “guides.zip” contains guides for arranging everything from the front, middle, and back section.
These guides come in the form of images which, when printed at a resolution of 10px/mm, line up with the structures. (I've printed them via GIMP which allows me to set the px/mm-resolution to 10px/mm.)
You can see an example below. The archive also contains images without the size indicator at the lower left, and images split into two sections to fit onto regular sized paper.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#
License:
Creative Commons — Attribution
DanielAlex
