January 19, 2024
Description
I wanted to illuminate the print bed on my SV05. I had an unused Ikea JANSJÖ LED USB lamp, so I modelled this lamp mount for it. The back of the mount attaches to the 40x20 extrusion with screws and t-nuts. The lamp is sandwiched between the front and back parts with M4 screws. The flexible neck has been convenient for lighting up different areas of the bed.
0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
southbaygsr
