Revopoint Miraco Turntable adapter

This is an adapter plate that attaches holds the tracking disk to the turn table provided with the revopoint miraco scanner.

For some reason the tracking disk is larger than the turn table, so I created this adapter so it holds it centered and flat. Real easy to print! 

There are two pieces, the Tracking_Plate which is the main component, this should fit right onto the turntable, no glue or table needed. Its a nice snug  fit. 

The second piece is optional, its the Retaining_ring which goes over the tracking disk and onto the Tracking_Plate. It holds it in place so you dont need to use glue or tape to keep the mat from sliding around. 

The turntable is 124mm in diameter and the tracking disk is 199mm in diameter for those interested.