This is an adjustable laptop stand that can be easily collapsed. There are six different levels for height adjustment. The stand is to keep your laptop at eye level while you were using it. I would not suggest trying to type on your laptop while using the stand, instead, I would suggest using the stand in conjunction with an external mouse and keyboard.
Printing Instructions
- Material: PLA or PETG (for extra strength)
- Supports: No
- Orientation:Â
- Print the Preset, Bottom, and Wedge pieces on their back laying horizontally
- Print the bolt and screw pieces on their backs vertically
Required Pieces (in order for this file to be useful, you need to print 2 of the laptop stands)
- Preset piece (2x) (included)
- Bottom piece (2x) (included)
- Wedge piece (2x) (included)
- Bolt (4x) (included)
- Screw (4x) (included)
Assembly (assembly is also detailed in the pictures)
- Lay down the bottom piece on a flat surface
- Place the holes of the preset piece and wedge piece over the holes of the bottom piece
- Place a screw through the hole in the bottom piece and the wedge piece, as well as the hole in the bottom piece and the preset piece
- Screw bolts onto the end of the screws
- Ensure that when you add the wedge piece to the bottom piece, it is flipped the correct direction so that the wedge fits into the preset piece when the laptop stand is in use
- Repeat this process to create another laptop stand
Usage (usage is also detailed in the pictures)
- Unfold the laptop stands and set them to the height you would like
- Play one laptop stand on either side of your computer
- Place your laptop into the hooks on the laptop stand
If you enjoy this model, please leave a like and a comment. If you have any questions, concerns, or problems, please personally contact me.
Devise3D
