Screwdriver-rack (Paramateric, CadQuery, PB-Swiss)

Fully parametric design made with jupyter-cadquery. Find the code on github: https://github.com/tdamsma/Screwdriver-rack

With just the shaft and handle diameters you should be able to adjust this design to pretty much any set of screwdrivers. I used wooden legs (15mm diameter, scavenged from an obsolete Ikea wine rack). As the final design does not fit my printer, I split it in two with a dovetail joint. I printed it without supports (except on the dovetail joint), no infill and no top layer using a 0.6mm nozzle. The dovetail ended up having a bit more play than I would have liked, I would use a 0.1mm gap instead of 0.2mm if I were to print it again