Prusa XL spool holder base for M3x20 and M4x20 screws

If you want to make a sixth spool holder with the spare parts from the kit, you will need a different base.

I have on my spare parts from the XL kit only one M3nEs nut over. And who the hell has an M5x85 screw at home?

So I did an remix, a bit ugly, but it get's printed without troubel, and the part does his job.

• Printer profile: 0,20mm FAST
• Filament type: PETG black
• Infill: Gyroid, 25%

Use a washer between the screw and the hole in the base. I printed it at 150% speed, without problems.

You will find the other 2 needed parts under "XL printable parts" → “Spool Holder”

One M3nEs nut should in the left over parts from the assembling.