Case for the Mutable Instruments Ambika Synthesizer

The case for the Mutable Systems Ambika Synthesizer  can be printed on a standard 3D printer with a minimum bed size of 25x21cm. Additional to the 3D printed parts only following items are required:

• 4 pcs. 3mm (Eurorack) square nuts with screws (if not available, the case could be also glued together)
• Glue (I recommend Cemedine Super-X glue)

The parts are designed to be printed with almost no support required. Only the back panel needs minimal support from the bed.

More information can be found here: https://spillerphoto.com/blogs/synthesizer/ambika-synthesizer-stl-file-for-3d-printed-case