August 8, 2021
Description
Designed this as a replacement for a spindle that was broken.
Both pieces were printed with the open falt side down, the tiny nipple is facing upwards.
Printed at 0.20 Speed setting from Prusa Slicer, 15% infill, no support needed.
The spring is the old one from the broken spindle.
SPINDLE MINIMUM LENGTH 116mm - MAXIMUM LENGTH 146mm. Any measure between theese two is good for this design.
Printer Brand:
Prusa
Printer:
Mini+
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament:
[
Category: Bathroom
License:
Creative Commons — Attribution
Meteora125
