IKEA Tradfri Mount for Honeycomb Storage Wall

This is a small magnetic IKEA Tradfri switch mount for your Honeycomb Storage Wall. It requires an 8mm by 2mm magnet to function properly.

The print should be paused at layer 119 to insert a 8x2mm magnet into the slot created by PrusaSlicer. Both the pause and the slot should be visible in the 3mf file.

IMPORTANT: Make sure the orientation of the magnet is correct! It must align with the magnet in your Tradfri switch, or it will repel your Tradrfri switch. To determine the correct alignment, attach the magnet to your switch then mark the visible side of the magnet. The marked side should face the HSW insert when inserted into the print.