Screwdriver Hex Bit Holder Wall Control Pegboard Mount

Holder that I use to mount some commonly used power screwdriver bits (standard 1/4" hex shank) on Wall Control pegboard using well nuts. There is a small recess for the well nuts such that the holder will be perfectly flush against the panels.

This should in theory work for any 0.25" pattern pegboard as well. Well nuts are overkill since you don't really need that much strength, but I just like my holders to be nice and tight up against the panels.

Designed for use with these well nuts: https://www.amazon.com/gp/product/B08LCRBS4S
Stock of these is kind of in and out and if you're interested definitely contact https://worthytools.com/ to express your interest.
I've sourced some well nuts of my own as well now, but mine will only work with Wall Control and not Pegboard.
https://www.ebay.com/itm/147216546044

Use #6-32 x 1"L bolts for mounting.

Bit Sets Pictured:
https://www.amazon.com/gp/product/B08598L78W
https://www.amazon.com/gp/product/B085986848

V2 Update 2/7/2026
I uploaded another version with the mounting plate above instead of below the bits.  This allows for an easier print but the tradeoff is you get a little bit less finger space behind the bits especially if you have shorter bits.