January 22, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Generic Black Transmission Distance: 5
PLA Generic Grey Transmission Distance: 5
PLA Default White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Grey
At layer #24 (2mm) swap to White for the rest.
Your last slider is set to 2.16mm which is lower than the model height.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Dukone.dev
