January 25, 2024
Description
Material: PETG or PLA, 15% infill, supports are needed only on part “vizualizer1”
You need 5 pcs neodym magnets 6x2mm and super glue for fixing magnets on the correct place.
The glue is no needed for installing on extruder of course.
This visualizer is possible to use with additional extruder fan as you can see on pictures.
I created the X-axis vizualizer with the same design. See here:
X-axis vizualizer od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com
License:
Creative Commons — Attribution
7
jawarmaniak
