Pong Clock Housing

Housing for Pong Clock based on the design and code explained in this instructables post:
https://www.instructables.com/id/Pong-Word-Clock/

My design is based on these LED matrix panels and not the ones used in the instructables post.
https://www.aliexpress.com/item/32712599985.html

I modified the original author's code to add functionality to turn the LED panel off between certain hours and/oe for the weekend. My version of the code is available here:
https://github.com/shatter71/pong\_clock

There are two versions of the bottom plate, one that just takes less material to print.

I am including the Fusion 360 archive files in case you want to edit anything like adding holes for the two buttons on the back rather than gluing them between the grates like I did because I forgot to add them to my design before printing.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2mm

Infill:

Filament:
Inland PLA+ White

Notes:

Category: Electronics