August 10, 2021
Description
Wanted to make some drink coasters but wasn't sure what design to go with. While searching, I stumbled across the idea of The Expanse logos and turning them into coasters. I took some existing OPA logos, traced new versions in Fusion360 and then created coasters for them.
The coasters are 102mm in diameter and are set up as 2-color prints with 0.3mm clearances to allow the pieces to snap together so gluing is not required
Printer Brand:
Creality
Printer:
CR-10S
No
Supports:
No
0.2mm
Infill:
15%
License:
Creative Commons — Attribution
ctbaker
