Echo Show 5 Adjustable Stand

This is a remix of the top of t_colon's adjustable Echo Show 5 stand. The base was printed as they designed it.

When I was searching for a stand for my Echo Show 5 I found one from t_colon which looked to be one of the best around. However, in my mind it had 2 problems. First it couldn't be printed in any orientation without supports and second it required 2 magnets to be glued to the bottom.

I solved the first problem by making the top into 2 parts. both can be printed without supports and are easy to assemble with a little super glue.

The second problem was solved by encapsulating magnets within the top itself. I happen to have common 15mm x 1mm magnets to hand so I designed the top to have spaces for those magnets to be inserted during the printing.

To insert them you need to insert a pause during the slicing on the last layer before the space for the magnets are covered over, insert the magnets and resume the print.