GPU Support Hexagon Pattern

If you get value from my work, consider supporting me at stu142.com/supportme. Links may be affiliate links. 

This is a GPU Support that I designed to help prevent sag. It is placed under the corner of the GPU and extends to the bottom of your PC case, and I think it looks pretty cool. 

I have included a large selection of sizes, so measure the vertical distance to where you would like your graphics card to be and select that size. 

Ensure there is no interference with GPU fans.

Optional Extras: 

1. A 2mm thick rubber sheet(Amazon) can be cut to size and stuck or glued to the bottom to provide grip. 
2. 6mm x 2mm magnets(Amazon) can be pressed or glued into the bottom using the magnet adapter printed piece. 

My Print Settings: 

• PLA or PETG work fine
• minimum 3 perimieters
• 10% infill
• 0.2 mm layer height
• Brim

Materials Used (Affiliate):

• Polymaker Polylite PETG Teal: Amazon 
• Polymaker Polylite PETG Purple: Amazon 

Alternative Material Options: 

• Polymaker Polyterra PLA: Amazon