INIU Battery adapter for BoboVR M2/M3 Battery Strap

The batteries that come with the M2/M3 BoboVR straps can't charge the Meta Quest 3 faster than the Quest discharges, so what you need are higher power rating batteries. I found these rather cheap INIU 22.5W power banks, which are enough to maintain the Quest 3 charge even during heavy gaming. They are just a bit heavier than the BoboVR batteries, but they are 10.000 mAh, so they should last you a long while.

I designed an adapter to use these power banks like the original batteries, you can just pop it onto the strap with magnets and connect the USB to the headset. Very easy.

There are built in supports for the top inside of the case (remove before placing battery inside), however you should add paint-on supports on the sides of the case, near the bed.

Print with 3 walls, 10-15% infill, 0.4-0.48 line width.

You will only need 4x small 10mm diameter magnets. You can just insert them in the holes after printing.

This is the link for the power bank: https://www.amazon.com/dp/B09176JCKZ

P.S.: You will also need a short USB cable to connect it to the headset. This is the one I use: https://www.amazon.com/dp/B0B4NRTTMB

(Just to be clear, this in not an AD and links here are not affiliated with anyone).