Multicolor Lamball from Palworld

Adapted from the in-game files, this is the Lamball Pal from the Palworld game in high resolution!

Each part (ears, legs, horns, etc) is separated in the file for easier multimaterial printing, but it can also be easily printed all in the same filament if you plan on painting afterwards.

Scale is a little large by default, scale down to 60+% for a more normal size.

If you prefer to paint the face after printing, feel free to keep the eyes/nose/mouth as the same color filament as the face and it will print as a sequential feature (picture provided)

Use lamball.3mf for Bambu/Orca slicer, lamball_generic.3mf for others

I also have this cutie available for purchase on Etsy here: https://www.etsy.com/listing/1665803973/adorable-lamball-from-palworld

Recommended MMU/Color Print Settings

Lamball.3mf includes most recommended settings configured for Bambu Slicer already, but below are general setting recommendations

0.2mm layer height. Lower is better for curved details, but will dramatically increase print time/filament swaps.

“Reduce Purge” Bambu X1C printer profile from here highly recommended: https://www.printables.com/model/390414-reduce-purge-waste-with-bambu-lab-ams but feel free to use whatever printer profile you like.

4-5 walls if using “purge into infill” setting (reduces waste), 3+ otherwise

Any % infill (higher = heavier)

Supports enabled (tree/organic slim recommended)

Single Filament/Default Settings

0.2mm or lower layer height

3+ walls (4 recommended for lighter filaments so infill isn't visible)

Any % infill

Supports enabled (tree/organic slim recommended)