Magnetic Math Board

DIFFICULT PRINT!

If you want the magnetic feature, this is a work intensive model with at least 98 magnets placed mid-print. There is a high chance for error if the magnets get reversed, so it also requires focus and fine motor skills!

FOR THE BOARD:

• Pause print at 3.72mm model height (layer 23 with 0.16mm layer height)
• Place 81 magnets, checking each for polarity orientation
• For numeral contrast: filament change at 5.00mm / layer 31

FOR THE PIECES:

• Pause print at 3.40mm model height (layer 21 with 0.16mm layer height)
• Place 17 magnets, checking each for polarity orientation
• For numeral contrast: filament change at 4.04mm / layer 25

I used these 6x3mm magnets: TRYMAG Refrigerator Magnets 300Pcs

Thanks for looking!