Cyberpunk NCPD Cosplay/Props

This model is a package of different models I made for my NCPD cosplay. These models are not ripped from the game, they were made by me in Blender :) 

For both the cuffs and the OC spray, I used a clip to attach it to my Duty Belt loops. This could also be attached to a vest too if needed. I printed the clip on its side so that the layers would not split and break the clip while wearing it (so just turn it 90 degrees on the Y axis).

To attach both the clips to the other devices, I would suggest using super glue so that they don't pull apart. Hot glue does not work well if it is for a Cosplay. 

The cuffs are one model, but you can split the model by sitting it up and cutting it in half in the Prusa slicer to separate the “prongs” and the “Center” of the cuffs. I suggest printing the “prongs” in PETG. When assembling the cuffs into one, it will be a tight fit. I suggest using a hammer with light taps. 

For the Officer Badge I included an image that I made in Gimp. This is not a 1 to 1 of the in-game model but gets the general idea. (Some Easter Eggs included). Print the PDF on normal printing paper and cut out. Once cut out, glue into the insert for the badge. 

Last but not least, signage! Both the “Comm” and “Lethal” signage can be put wherever you need to fill ‘dead space’ on your cosplay. 

Thanks to everyone that was interested in the cosplay! For anyone that wants to use or remake these models, just give some attribution to the original models and I'm all good :D