I don't have much time… The Organization might be listening.
But here is my first try with HueForge: Kurisu Makise from the visual novel “Steins;Gate”.
Printing instructions:
- Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mm
- Filaments Used:
- PLA PolyTerra Charcoal Black Transmission Distance: 0.3
- PLA PolyLite Steel Grey Transmission Distance: 1
- PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
- Start with Charcoal Black
- At layer #8 (0.52mm) swap to Steel Grey
- At layer #12 (0.76mm) swap to Cotton White for the rest.
El Psy Kongroo.
Tacos
