Individual Lithophane Night Light IKEA MÖRKRÄDD - Jade Dragon

TL;DR

A frame to build your own lithophane night lamp based on IKEA MÖRKRÄDD led lamp.

 https://www.ikea.com/de/de/p/moerkraedd-led-nachtlicht-mit-sensor-weiss-70349860/ 

Collection

LED covers and nightlights

Motivation

(prusament galaxy green PLA and marble PLA)

Lithophane pictures need light to unhide their beauty and with 5€ for two lamps the IKEA MÖRKRÄDD is a perfect light source to build your own night lamps without soldering or glue or screws, juts plug and play.

Let's get started

Just print the frame and if you like it the dragon.

How to make your own lithophane

It all starts here: https://itslitho.com/

Step by step:

• upload your image https://tool.itslitho.com/UploadImg
• width 80 mm
• height 80 mm
• min thickness 0.8 mm
• max thickness 4 mm
• frame 2 mm

Attribution

© yahbluez

Attribution for the dragon to: 小雨点

Source of the night lamp: IKEA

Can I sell copies of this?

Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.

Donation

If you like to donate you can use  ko-fi or paypal. 
Money will be spend on filament and beer.

Filament used

• Prusament PLA Galaxy Green
• Prusament PETG Carmin Red
• extrudr PLA black
• IEMAI PETG transparent rainbow
• enotepad PLA marble