this is a coin/badge/symbol/icon that can be seen in a battle arena of Earth Rumble - Avatar: The Last Airbender
it was modeld using the scenes from the episode “The Blind Bandit”
there are 3 sets:
Single Part - model is in one piece (no supports needed)
Multi Part - separated the platform from the symbol (you have to use supports for the symbol if you print it this way)
Multi Material - separated the details from the coin and the platform (as in single part, you do not need any supports)
Scene with the symbol:
| DESIGN DECISIONS |
it had to be modeled so that it didn't need any supports on base model
i wanted to make it 3D - in the episode it was depicted mostly as 2D poster
Rendered view od the symbol:
| PRINT SETTINGS |
for the base model (Single Part) I have included the 3mf file with my setting that I used for the print in the pictures
there are no need for supports on Single Part and Multi Material models, but if you defide to print the Multi Part model, you will need to use supports for the coin
General settings:
0,15 - 0,25 mm layer height (I have used variable layer height on my print)
Sedak
