Tie Fighter inspired tensegrity table

A Star Wars Tie Fighter inspired tensegrity print-in-place table that prints without supports.

When printing use the 0.3mm layer height, make sure ‘detect thin walls’ is checked and put your seams at the rear. When sliced you should be able to see the single strands of filament and there should be no empty layers.

Any problems - message me @3DPrintBunny

Would you like to know more about 3d printed tensegrity? Have a look at my [guide to 3d printed tensegrity structures](https://3dwithus.com/tensegrity-models-designs-for-3d-printing-and-slicer-settings) on the [3DWithUs webpage](https://3dwithus.com/tensegrity-models-designs-for-3d-printing-and-slicer-settings).